Installation Guides

Portable Metal Hammock Stand Installation Guide

2022-12-05

    Portable Metal Hammock Stand Installation Guide


Whether you're taking a nap in the sun or concentrating on a new novel, a hammock allows you to relax as much as you want. This hammock stand allows you to relax without the hassle of installation. Even better, its powder-coated steel tube assembly requires no tools and fits neatly into a duffel bag for easy off-season storage. Hammock is not included. Please check the installation guide carefully.


Product List


                      A Upright tube(l/r) X2                                                     B crossbar X2

                              C  leg X2                                                       D hook bolt set  X2

                          D threaded knob X5                                           E carrying case X1



Installation steps

 

STEP 1
B: 1 C: 2 E: 3
• Install one Threaded Knob (E) into the center of Crossbar (B).
• Slide two Legs (C) into Crossbar (B).
• Align the mounting holes and securely fasten each leg to the crossbar using one Threaded Knob (E).
NOTE: Installation of the threaded knob into the center of the crossbar is essential for achieving the maximum weight capacity. If the knob is not installed, the crossbar could bend and break the stand.

STEP 2
A:2 E:2
Slide to Upright Tube (A) onto the legs.
Align the mounting holes and securely fasten each upright tube using Threaded Knobs (E).

STEP 3
D:2
Ensuring the hook faces downward, securely install one Hook Bolt Set (D) on the outside of each upright, as shown.
IMPORTANT: The illustration is forreference only. Installation of the hooks will vary by hammock size. Adjust hooks as needed.

This portable hammock stand accommodates most Brazilian-style hammocks that are between 10' and 12.5' in length from ring to ring.
Always leave some slack in the fabric when hanging your hammock.
The center of the hammock should be at a height where the user can enter and exit the hammock safely.
Always enter and exit hammocks slowly; moving too quickly can cause the hammock and/or stand to tip over.


 Adhusting hammock height
(hammock not included)
Install the hooks to the height that best suits your Brazilian hammock.
The hammock should have a slight curve when first hung. There should be enough slack to enter and exit the hammock safely, but it must also be tight enough to accommodate the user's weight.
Lay the ropes of your Brazilian hammock over the top of the uprights and affix the rings to the hooks.
The fabric and ropes stretch over time; adjust the height as needed.
Always enter and exit the hammock in the middle. Do not use any hammock that hangs past the base legs.

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept